Record and layer
Eight tracks in two banks of four. Record, overdub, play, stop, and undo or redo each layer. Every track follows one master loop clock, and a track can run for a whole multiple of the first loop's length.
Open source · GPLv3
Segno is a live looping appliance: a floor console with ten footswitches and two screens, a native C audio engine, and a Flutter interface on a Raspberry Pi 5. The software, firmware, hardware and interface designs are public, in three repositories.
Status: in active development. The software runs on the appliance today with the console board on the bench. The enclosure exists as a CAD design, so every picture of the console on this page is a render. The devlog has progress notes as the work merges.
Record a phrase, let it repeat, and add another part over it, without taking your hands off the instrument.
Eight tracks in two banks of four. Record, overdub, play, stop, and undo or redo each layer. Every track follows one master loop clock, and a track can run for a whole multiple of the first loop's length.
Ten footswitches, an encoder with an LED ring, and a light bar above each switch that shows its state. Two jacks take an expression pedal or an extra footswitch. DIN MIDI in and out, and USB MIDI controllers through a mapping layer.
Loop against a tempo with a click and count-in, or switch to free mode and set the loop length by playing. Latency is measured with a loopback cable and compensated when recording.
Built-in effects on live inputs, on recorded tracks, and on outputs. Each input can be heard dry on one set of outputs and with effects on another at the same time.
Save a loop session as WAV stems and a manifest, and open it again later. Record a whole performance and export it as an Ableton Live 12 project.
The appliance installs signed system updates into a second partition and boots into it on trial. A failed boot falls back to the previous system.
The large screen shows the tracks and the mixer. The interface is a Flutter app that runs directly on the display hardware, one Flutter engine per screen.
Both images are captures from the app's UI tests, with simulated track state.
A wedge-shaped folded sheet-metal console, 850 mm wide, with the top sloping toward the player. The ten footswitches are built into the chassis and wired inside it.
Renders of the console design from Autodesk Fusion. Not photos.
The console board reports what your feet do. The app decides what that means. The engine does the audio.
Console board
RP2350 firmware. Sends footswitch, encoder and pedal-jack events; lights the LEDs from state frames the app sends back. Holds no looper state.
Flutter app
Interface, looper behaviour, sessions, MIDI and settings. Layered: widgets, blocs, repositories, data clients.
Audio engine
Native C on miniaudio. Recording, playback, mixing and effects on a real-time thread.
USB audio interface
Instrument and microphone inputs, monitor and main outputs.
All of it runs on a Yocto Linux image for the Raspberry Pi 5.
The software, firmware and hardware designs are public under the GNU General Public License v3.
lib/ | The Flutter app |
packages/ | The audio engine (segno_engine) and the Dart packages the app is built from |
firmware/ | Firmware for the console board and the ring board |
segno-hardware | KiCad board generators, the parametric enclosure, 3D-printed parts and the manufacturing package |
segno-design | Snapshots of the Penpot design file, the frozen Pencil file and the design studies |
deploy/ | The Yocto image and the build for the Raspberry Pi |
docs/ | Design notes, plans and build instructions |